Vampamid 6 0024 V0 PA6 Grey

Pet Flakes

Highlights:

Bottles made of polyethylene terephthalate can be used to make lower grade products, such as carpets. To make a food grade plastic, the bottles need to be hydrolysed down to monomers, which are purified and then re-polymerised to make new PET.

Add to wishlist

Compare

Quick View

Recycle Waste Plastic

PPR Granules

Highlights:

Polypropylene Granules (PP)

PP plastic particles refer to polypropylene, which is a colorless, odorless, non-toxic, translucent solid substance.
Polypropylene is a thermoplastic synthetic resin with excellent properties. It is a colorless semi-transparent thermoplastic
lightweight general purpose plastic.

Polypropylene (PP), as one of the main plastics, has good electrical properties and high frequency insulation is not affected by humidity, but becomes brittle at low temperatures, is not wear-resistant, easy to age,suitable for the production of general mechanical parts, corrosion-resistant parts and insulating parts.

Characteristics of PP plastics

1, the density of PP material is relatively small (0.91g/cm^3), in fact, it is the smallest density of commonly used plastics.

2, PP material has very good stress cracking resistance, high bending fatigue life.

3, good heat resistance. PP products can be used for a long time in a high temperature environment below 100 degrees. Temperature to 150 degrees or so will not be significantly deformed.

4, good chemical stability. PP has excellent chemical stability and is inert to most acids, bases, salts and oxidants. In addition, PP has food grade and is widely used.

5, processing performance. Once a certain temperature is reached,PP particles melt rapidly, and can all be converted into a molten state within a few degrees. The melt viscosity of PP is relatively low, so the molding flow is good, especially when the melt flow rate is higher, the melt viscosity is smaller, which is suitable for large thin-walled products injection molding.

item	value


Brand Name	LT
Model Number	PP8303
Application	plastic, drum, pipe, film
Material	Plastic Raw Material Granules
Color	Transparent White
Grade	Injection Molding Grade
Product name	Polypropylene PP Resin
MOQ	15mt
Sample	Avaliable
Packing	25kg/bag
Quality	Excellent
Keyword	100% Virgin PP Granules

Details Images

Add to wishlist

Compare

Quick View

Recycle Waste Plastic

PE 80+100 Repro

Highlights:

Free Sample High Density Polyethylene Resin HDPE PE100 Virgin HDPE Granules recycled virgin HDPE resin

Film Grade HDPE
Item	Test Condition	Test Method	Value	Unit
Density		ISO 1183	0.944-0.955	g/cm3
MFR	190°C/2.16kg	ISO 1133	0.03-0.07	g/10min
Tensile Strength at Yield		ISO 527-2	22	MPa
Elongation at break		ISO 527-2	>350	%
ESCR	F50,50°C,100%	ASTM D-1693A	1000	h
VICAT		ASTM D-1525	126	°C

Blowing molding Grade HDPE
Item	Test Condition	Test Method	Value	Unit
Density		ISO 1183	0.950~0.955	g/cm
MFR	190°C/2.16kg	ISO 1133	1.7~2.5	g/10min
Tensile strength at Yield		ISO 527-2	24	MPa
Elongation at break		ISO 527-2	>600	%

Add to wishlist

Compare

Quick View

Recycle Waste Plastic

Pvc Suspension K67 Wet 30% Max

Highlights:

PVC RESIN SUSPENSION WET AT 25% MAX

prime resin was stored outside and took the rain

very good materials

white

Add to wishlist

Compare

Quick View

Recycle Waste Plastic

PVC granules, PVC powder

Highlights:

Usage/Application	Manufacturing PVC Pipe
Packaging Type	25kg
Minimum Order Quantity	1000

Add to wishlist

Compare

Quick View

Recycle Waste Plastic

PVC plastic raw material

Highlights:

Specification

item	value


Model Number	PVC
Product name	Manufacturers supply PVC pellets
color	customizable
material	PVC
type	PVC plastic raw material
Application	for plastic products
Form	3 – 5 Mm Granules
Shelf life	2 years