PVC regrind – soft flooring production waste
In Stock
Highlights:
Compareflooring production waste regrind
CategoryPVC
ConditionRegrind
Quantity100 MT
SupplyOngoing
Category: Recycle Waste Plastic
Related products
HDPE Pallet Regrinds
Highlights:
Ongoing loads of HDPE Pallet regrinds – no HMW but a small amount of PP will be within
Melt 2-5
$0.26 / lb
CategoryHDPE
ConditionRegrind
Quantity40,000 lbs
SupplyOngoing
1000lb bales of combined #1 and #2 plastics
Highlights:
PET or PETE 1 is a common type of plastic used for packaging. It is transparent, lightweight, strong, and has good barrier properties. PET is easily recyclable and is commonly used for beverage bottles and food containers. It is not recommended to reuse disposable PET drinking bottles.
CategoryPET/PETE
ConditionBaled
Quantity100 MT
abs-novodur
Highlights:
novodur regrind
thin lack
CategoryABS
ConditionRegrind
Quantity2 MT
SupplyOngoing
PVC Regrind
Highlights:
Regrind Recycled Plastic Post PVC Scrap
Application
electronic and electrical components, optical grade, automotive parts, General grade, power tool accessories, filling grade, wire and cable grades, sports equipment, plate grade, Food Grade, medical grade, profiles, fibers, special materials for bottle caps, pipe grade, lighting fixtures, home appliance components, film grade, thin-walled products, PVC Granules
Grade
hollow grade, hot melt grade, calendering, molding, demoulding grade, rotational molding grade, extrusion grade, blown film grade, blow molding grade, injection molding grade, foaming grade, drawing grade, coating grade, PVC Granules
Feature
High flow, aging resistance, reinforced grade, Powder, ANTISTATIC, High Gloss, standard grade, High Strength, high temperature resistance, weather resistance, wear resistance, conductive grade, High sliding, transparent grade, low temperature resistance, High Rigidity, Flame retardant grade, Chemical Resistance, PVC Granules
PA Mix
Highlights:
PA 80%- PP/POM 20% mix regrind
CategoryNylon (PA)
ConditionFlake
Quantity50 MT
SupplyOne-off
Polypropylene Grinding Scrap
Highlights:
|
GRADE
|
BRAND CODE
|
MFR
|
APPLICATION
|
|
RAFFIA DRAWING
|
T30S
|
2-4
|
Braided belt, rope, carpet backing, container bag, woven bag
|
|
INJECTION
|
HP500N
|
12
|
Furniture, partitions and containers, etc. Suitable for food contact.
|
|
FIBER
|
Y26
|
26
|
Non-woven, high-speed spinning, fine denier staple fiber, continuous filament, non-woven fabric
|
|
COPOLYMER
|
K9928H
|
28
|
Washing machine parts, auto parts, home appliance housings
|
|
RANDOM COPOLYMER
|
4220
|
0.25±0.10
|
Hot and cold water pipe material pipe grade
|
|
THIN WALL INJECTION
|
H9018
|
54
|
Thin-walled food container
|
|
BLOW MOLDING
|
M250E
|
1.8-3.2
|
Stationery, Hollow blow molding transparent, thermoforming product,Medical saline bottle etc.
|
PPR Granules
Highlights:
Polypropylene Granules (PP)
PP plastic particles refer to polypropylene, which is a colorless, odorless, non-toxic, translucent solid substance.
Polypropylene is a thermoplastic synthetic resin with excellent properties. It is a colorless semi-transparent thermoplastic
lightweight general purpose plastic.
Polypropylene is a thermoplastic synthetic resin with excellent properties. It is a colorless semi-transparent thermoplastic
lightweight general purpose plastic.
Polypropylene (PP), as one of the main plastics, has good electrical properties and high frequency insulation is not affected by humidity, but becomes brittle at low temperatures, is not wear-resistant, easy to age,suitable for the production of general mechanical parts, corrosion-resistant parts and insulating parts.
Characteristics of PP plastics
1, the density of PP material is relatively small (0.91g/cm^3), in fact, it is the smallest density of commonly used plastics.
2, PP material has very good stress cracking resistance, high bending fatigue life.
3, good heat resistance. PP products can be used for a long time in a high temperature environment below 100 degrees. Temperature to 150 degrees or so will not be significantly deformed.
4, good chemical stability. PP has excellent chemical stability and is inert to most acids, bases, salts and oxidants. In addition, PP has food grade and is widely used.
5, processing performance. Once a certain temperature is reached,PP particles melt rapidly, and can all be converted into a molten state within a few degrees. The melt viscosity of PP is relatively low, so the molding flow is good, especially when the melt flow rate is higher, the melt viscosity is smaller, which is suitable for large thin-walled products injection molding.
|
item
|
value
|
|
Brand Name
|
LT
|
|
Model Number
|
PP8303
|
|
Application
|
plastic, drum, pipe, film
|
|
Material
|
Plastic Raw Material Granules
|
|
Color
|
Transparent White
|
|
Grade
|
Injection Molding Grade
|
|
Product name
|
Polypropylene PP Resin
|
|
MOQ
|
15mt
|
|
Sample
|
Avaliable
|
|
Packing
|
25kg/bag
|
|
Quality
|
Excellent
|
|
Keyword
|
100% Virgin PP Granules
|
Details Images
PVC granules, PVC powder
Highlights:
| Usage/Application | Manufacturing PVC Pipe |
| Packaging Type | 25kg |
| Minimum Order Quantity | 1000 |
Pet Flakes
Highlights:
Bottles made of polyethylene terephthalate can be used to make lower grade products, such as carpets. To make a food grade plastic, the bottles need to be hydrolysed down to monomers, which are purified and then re-polymerised to make new PET.
PVC plastic raw material
Highlights:
Specification
|
item
|
value
|
|
Model Number
|
PVC
|
|
Product name
|
Manufacturers supply PVC pellets
|
|
color
|
customizable
|
|
material
|
PVC
|
|
type
|
PVC plastic raw material
|
|
Application
|
for plastic products
|
|
Form
|
3 – 5 Mm Granules
|
|
Shelf life
|
2 years
|
PE 80+100 Repro
Highlights:
Free Sample High Density Polyethylene Resin HDPE PE100 Virgin HDPE Granules recycled virgin HDPE resin
|
Film Grade HDPE
|
||||
|
Item
|
Test Condition
|
Test Method
|
Value
|
Unit
|
|
Density
|
ISO 1183
|
0.944-0.955
|
g/cm3
|
|
|
MFR
|
190°C/2.16kg
|
ISO 1133
|
0.03-0.07
|
g/10min
|
|
Tensile Strength at Yield
|
ISO 527-2
|
22
|
MPa
|
|
|
Elongation at break
|
ISO 527-2
|
>350
|
%
|
|
|
ESCR
|
F50,50°C,100%
|
ASTM D-1693A
|
1000
|
h
|
|
VICAT
|
ASTM D-1525
|
126
|
°C
|
|
|
Blowing molding Grade HDPE
|
||||
|
Item
|
Test Condition
|
Test Method
|
Value
|
Unit
|
|
Density
|
ISO 1183
|
0.950~0.955
|
g/cm
|
|
|
MFR
|
190°C/2.16kg
|
ISO 1133
|
1.7~2.5
|
g/10min
|
|
Tensile strength at Yield
|
ISO 527-2
|
24
|
MPa
|
|
|
Elongation at break
|
ISO 527-2
|
>600
|
%
|
|
Recently Viewed
PVC regrind – soft flooring production waste
Highlights:
flooring production waste regrind
CategoryPVC
ConditionRegrind
Quantity100 MT
SupplyOngoing
