Lightbox

Polyester Film Trims

Previous product
rPP Pellets
Next product
PA6 Natur regrind

In Stock
Highlights:

This is the metalized plyester trims in bulk quantities .We having these trims everymonth.

Details

CategoryPolyester
ConditionFilm
Quantity1 MT
SupplyOngoing
Add to wishlist
Compare
Category:

Related products

Quick View

rPP Pellets

Highlights:
  • Pigment : Carbon Black
  • Content of Carbon Black : 15%-45%
  • Carbon Black Type : Columbia
  • Career : Grade A Virgin/Recycled LDPE/LLDPE/HDPE
  • Application : PE blowing film,PP injection molding
  • Usage : 5%-10%
Application PE blowing film
Material LDPE/LLDPE/HDPE
Carbon Black Type Columbia
Content of Carbon Black 15%-45%
Pack Type Bags
Usage Industry
Read more
Add to wishlist
Compare
Quick View

Yarn

Highlights:

Wholesale Ne1/16 Recycled Blended Yarn Cotton Thread For Knitting With Cheap Prices
item
value
Feature
Moisture-Absorbent, Anti-pilling, Recycled
Yarn Type
Cotton, Polyester
Use
For knitting sock gloves towel…
Yarn Count
NE1/16
Model Number
J0011
Color
Customized Color
Twist
<650TPM
Strength
>250CN
Place of Origin
Zhejiang, China
Material
Polyester / Cotton
Read more
Add to wishlist
Compare
Quick View

PE 80+100 Repro

Highlights:

Free Sample High Density Polyethylene Resin HDPE PE100 Virgin HDPE Granules recycled virgin HDPE resin

Film Grade HDPE
Item
Test Condition
Test Method
Value
Unit
Density
ISO 1183
0.944-0.955
g/cm3
MFR
190°C/2.16kg
ISO 1133
0.03-0.07
g/10min
Tensile Strength at Yield
ISO 527-2
22
MPa
Elongation at break
ISO 527-2
>350
%
ESCR
F50,50°C,100%
ASTM D-1693A
1000
h
VICAT
ASTM D-1525
126
°C
Blowing molding Grade HDPE
Item
Test Condition
Test Method
Value
Unit
Density
ISO 1183
0.950~0.955
g/cm
MFR
190°C/2.16kg
ISO 1133
1.7~2.5
g/10min
Tensile strength at Yield
ISO 527-2
24
MPa
Elongation at break
ISO 527-2
>600
%
Read more
Add to wishlist
Compare
Quick View

PVC plastic raw material

Highlights:
Specification
item
value
Model Number
PVC
Product name
Manufacturers supply PVC pellets
color
customizable
material
PVC
type
PVC plastic raw material
Application
for plastic products
Form
3 – 5 Mm Granules
Shelf life
2 years
Read more
Add to wishlist
Compare
Quick View

Carbon Black

Highlights:

High Grade Carbon black. No CC. Carbon 70% USAGE less than 1% Shinny and Black Suitable use for pelletized: ABS / PS / PP / HDPE etc

Read more
Add to wishlist
Compare
Quick View

PVC Regrind

Highlights: 
Regrind Recycled Plastic Post PVC Scrap
Application
electronic and electrical components, optical grade, automotive parts, General grade, power tool accessories, filling grade, wire and cable grades, sports equipment, plate grade, Food Grade, medical grade, profiles, fibers, special materials for bottle caps, pipe grade, lighting fixtures, home appliance components, film grade, thin-walled products, PVC Granules
Grade
hollow grade, hot melt grade, calendering, molding, demoulding grade, rotational molding grade, extrusion grade, blown film grade, blow molding grade, injection molding grade, foaming grade, drawing grade, coating grade, PVC Granules
Feature
High flow, aging resistance, reinforced grade, Powder, ANTISTATIC, High Gloss, standard grade, High Strength, high temperature resistance, weather resistance, wear resistance, conductive grade, High sliding, transparent grade, low temperature resistance, High Rigidity, Flame retardant grade, Chemical Resistance, PVC Granules
Read more
Add to wishlist
Compare
Quick View

Abs granulated plastic pellet

Highlights:

Key Properties of ABS:
* High rigidity.
* Good impact resistance, even at low temperatures.
* Good insulating properties.
* Good weldability.
* Good abrasion and strain resistance.
* High dimensional stability (Mechanically strong and stable over time)
* High surface brightness and excellent surface aspect.

Uses:
Known for its medium strength and performance at affordable pricing, ABS Resin is commonly used for injection molding
applications
. The mechanical properties of ABS Resin plastic makes it ideal for drilling, turning, die-cutting and shearing.
Read more
Add to wishlist
Compare
Quick View

Storing bags 25kg available

Highlights:

We have jumbo bags and 25kg bags with ldpe linner or without ldpe linner kindly contact for more details

$1.00 / kg
CategoryOther, not plastic
ConditionBaled
Quantity1,000,000 kg
SupplyOngoing
Read more
Add to wishlist
Compare
Quick View

PET

Highlights: 
Green PET Bottle Flakes

Hot Washed Clean PET Bottle Flakes

CategoryPET/PETE
ConditionFlake
Quantity100 MT
SupplyOngoing
Read more
Add to wishlist
Compare
Quick View

PPR Granules

Highlights:

Polypropylene Granules (PP)

PP plastic particles refer to polypropylene, which is a colorless, odorless, non-toxic, translucent solid substance.
Polypropylene is a thermoplastic synthetic resin with excellent properties. It is a colorless semi-transparent thermoplastic
lightweight general purpose plastic.

Polypropylene (PP), as one of the main plastics, has good electrical properties and high frequency insulation is not affected by humidity, but becomes brittle at low temperatures, is not wear-resistant, easy to age,suitable for the production of general mechanical parts, corrosion-resistant parts and insulating parts.
 

Characteristics of PP plastics

1, the density of PP material is relatively small (0.91g/cm^3), in fact, it is the smallest density of commonly used plastics.
2, PP material has very good stress cracking resistance, high bending fatigue life.
 
3, good heat resistance. PP products can be used for a long time in a high temperature environment below 100 degrees. Temperature to 150 degrees or so will not be significantly deformed.
 
4, good chemical stability. PP has excellent chemical stability and is inert to most acids, bases, salts and oxidants. In addition, PP has food grade and is widely used.
 
5, processing performance. Once a certain temperature is reached,PP particles melt rapidly, and can all be converted into a molten state within a few degrees. The melt viscosity of PP is relatively low, so the molding flow is good, especially when the melt flow rate is higher, the melt viscosity is smaller, which is suitable for large thin-walled products injection molding.
item
value
Brand Name
LT
Model Number
PP8303
Application
plastic, drum, pipe, film
Material
Plastic Raw Material Granules
Color
Transparent White
Grade
Injection Molding Grade
Product name
Polypropylene PP Resin
MOQ
15mt
Sample
Avaliable
Packing
25kg/bag
Quality
Excellent
Keyword
100% Virgin PP Granules
Details Images
Read more
Add to wishlist
Compare
Quick View

PA Mix

Highlights:

PA 80%- PP/POM 20% mix regrind

CategoryNylon (PA)
ConditionFlake
Quantity50 MT
SupplyOne-off
Read more
Add to wishlist
Compare
Quick View

PA6 Natur regrind

Highlights:
CategoryNylon (PA)
ConditionFlake
Quantity6 MT
SupplyOne-off
Read more
Add to wishlist
Compare

Recently Viewed

Quick View

PPR Granules

Highlights:

Polypropylene Granules (PP)

PP plastic particles refer to polypropylene, which is a colorless, odorless, non-toxic, translucent solid substance.
Polypropylene is a thermoplastic synthetic resin with excellent properties. It is a colorless semi-transparent thermoplastic
lightweight general purpose plastic.

Polypropylene (PP), as one of the main plastics, has good electrical properties and high frequency insulation is not affected by humidity, but becomes brittle at low temperatures, is not wear-resistant, easy to age,suitable for the production of general mechanical parts, corrosion-resistant parts and insulating parts.
 

Characteristics of PP plastics

1, the density of PP material is relatively small (0.91g/cm^3), in fact, it is the smallest density of commonly used plastics.
2, PP material has very good stress cracking resistance, high bending fatigue life.
 
3, good heat resistance. PP products can be used for a long time in a high temperature environment below 100 degrees. Temperature to 150 degrees or so will not be significantly deformed.
 
4, good chemical stability. PP has excellent chemical stability and is inert to most acids, bases, salts and oxidants. In addition, PP has food grade and is widely used.
 
5, processing performance. Once a certain temperature is reached,PP particles melt rapidly, and can all be converted into a molten state within a few degrees. The melt viscosity of PP is relatively low, so the molding flow is good, especially when the melt flow rate is higher, the melt viscosity is smaller, which is suitable for large thin-walled products injection molding.
item
value
Brand Name
LT
Model Number
PP8303
Application
plastic, drum, pipe, film
Material
Plastic Raw Material Granules
Color
Transparent White
Grade
Injection Molding Grade
Product name
Polypropylene PP Resin
MOQ
15mt
Sample
Avaliable
Packing
25kg/bag
Quality
Excellent
Keyword
100% Virgin PP Granules
Details Images
Read more
Add to wishlist
Compare
Quick View

Polypropylene Grinding Scrap

Highlights:
GRADE
BRAND CODE
MFR
APPLICATION
RAFFIA DRAWING
T30S
2-4
Braided belt, rope, carpet backing, container bag, woven bag
INJECTION
HP500N
12
Furniture, partitions and containers, etc. Suitable for food contact.
FIBER
Y26
26
Non-woven, high-speed spinning, fine denier staple fiber, continuous filament, non-woven fabric
COPOLYMER
K9928H
28
Washing machine parts, auto parts, home appliance housings
RANDOM COPOLYMER
4220
0.25±0.10
Hot and cold water pipe material pipe grade
THIN WALL INJECTION
H9018
54
Thin-walled food container
BLOW MOLDING
M250E
1.8-3.2
Stationery, Hollow blow molding transparent, thermoforming product,Medical saline bottle etc.
Read more
Add to wishlist
Compare
Scroll To Top
Close
Close
Shop
0 Wishlist
0 Cart

Shopping Cart

Close

Shopping cart is empty!

Continue Shopping

Polyester Film Trims
Read more